Board logo

Subject: RAD Studio 11.3 and last CnWizard very big issue [Print This Page]

Author: ukrainian    Time: 2023-3-10 21:25     Subject: RAD Studio 11.3 and last CnWizard very big issue

Hi,
After I update my RAD Studio to last one 11.3 I have serious problem with CnWizards. This functionality did not work:
1. "Procedure List" did not work and after open all methods start drawing very slow and Delphi raise error "Out of system resources"!!! See screenshot procedure_list_error.png
2. "Unit list..." draw units very slow and when I start writing some text it freeze. See screenshot "unit_list_error.png"
3. "Form list" after open raise exception "Not enough memory resources are available to process this command". See screenshot form_list_error.png

I was with last stable CnWizard version 1.2.5.1109 when update RAD Studio. Then migrate to last unstable 1.2.6.1123_Unstable and the problem continued!

Image Attachment: [Procedure list error] procedure_list_error.png (2023-3-10 21:25, 47.05 K) / Download count 178
http://bbs.cnpack.org/attachment.php?aid=1153



Image Attachment: [Unit list error] unit_list_error.png (2023-3-10 21:25, 25.26 K) / Download count 169
http://bbs.cnpack.org/attachment.php?aid=1154



Image Attachment: [Form list error] form_list_error.png (2023-3-10 21:25, 25.8 K) / Download count 164
http://bbs.cnpack.org/attachment.php?aid=1155


Author: Passion    Time: 2023-4-11 11:23

The List Width Problem for 11.3 is fixed in latest stable version 1.2.6.1126. Thanks for your report.
Author: iwancs    Time: 2023-7-26 22:31

I still have an issue showing procedure list, very slow when showing the procedure list, but no out of memory error, it will open, but super slow. I've installed the latest stable 1.2.7.1138

Thank you
Author: Passion    Time: 2023-8-3 17:50

What size of your source file? How many lines?
Author: ukrainian    Time: 2023-11-28 20:17

Hi,<br />
I still have problem with CnWizars and RAD Studio! With latest version(RAD Studio 12 and nightly build 1.2.8.1158) the only thing that "works" is <b>Procedure list</b>, but it is very slow! The other functionality "Unit list" and "Form List" did not work. See attachments. I have only 6 form and even that functionality "Form list" raise "Not enough memory.....". The "Unit list" is load very slow, no columns and cannot search/operate, just is load and freeze.

Image Attachment: [Form list issue] Form_List_issue.png (2023-11-28 20:17, 24.77 K) / Download count 80
http://bbs.cnpack.org/attachment.php?aid=1161



Image Attachment: [Unit list issue] Unit_list_issue.png (2023-11-28 20:17, 47.04 K) / Download count 76
http://bbs.cnpack.org/attachment.php?aid=1162


Author: Passion    Time: 2023-11-29 09:49

1158 should have fixed this problem. But the wrong settings width still exists.

Could you run "Config Import/Export Tool" in Start Menu to reset CnWizards' settings and try 1158 again?
Author: ukrainian    Time: 2023-12-7 16:53

Thanks!
After "restore" now everything works fine!
Author: iwancs    Time: 2024-2-20 09:09

Thank you, the problem solved after resetting the config




Welcome to CnPack Forum (http://bbs.cnpack.org/) Powered by Discuz! 5.0.0